Car winches are designed for self-pulling cars when they get stuck in viscous soil, quagmire, or to overcome a difficult road section. Also, car winches are used to help pull out damaged or stuck cars. Are established on SUVs or off-road equipment.
The main value by which winches are chosen is tractive effort. Pulling force is the value of the force with which the winch drive mechanism is able to pull. Its designation is usually indicated in pounds (lbs), where 1 pound is equal to 0.4535 kg.
It should also be borne in mind that the traction force can be doubled if a special power unit (polyspast) is used.
Are applied to any cars with the curb weight up to 3 tons.
Winches of the HUNTER series have proven themselves on the untrodden trails favored by avid anglers and hunters. This series has gained the greatest popularity among off-road enthusiasts, due to its high quality and affordability in its segment.
This model of the redBTR HUNTER winch has passed all the necessary tests for traction and reliability. Fully compatible with UAZ vehicles. Since 2019, it has been installed at the UAZ LLC plant and is included in the package of UAZ Hunter Expeditionary and UAZ SGR Combi Expedition vehicles.
Winch gearbox of planetary type with three-stage transmission. The gear teeth of the reducer undergo a special process of nitrocarburizing the surface layer with their additional hardening. This makes it possible to achieve metal hardness up to 35 HRC (on the Rockwell scale), which protects against tooth deformation under maximum loads.
The HUNTER winch has a degree of protection against moisture and dust IP67, thanks to which it can work even with a short immersion under water to a depth of 1 meter. The rubber gasket in the connection of the motor housing with the bracket guarantees water tightness, and on the side of the connection with the winch drum there are rubber cuffs that protect the motor and gearbox from moisture. The connector of the contact group is protected from corrosion by a cap. The control unit is closed from moisture.
Specifications Pulling force: 12000 pounds (5448 kg). Motor type: 6.5 HP / 4.5 kW, 12 V, with field winding. Reducer: 3-stage planetary. Gear ratio: 265:1. Inclusion / deenergizing of a reducer: Rotary handle. Drum: ø 64 × 254 mm. Load cycle: Periodic. Mounting dimensions: 254 × 114.3 mm. Dimensions: (L × W × H) 540 × 160 × 165 mm. Package dimensions: (L × W × H) 590 × 360 × 210 mm. Weight: 21.36 kg.
Equipment This electric winch comes without a complete set.