Car winches are designed for self-pulling cars when they get stuck in viscous soil, quagmire, or to overcome a difficult road section. Also, car winches are used to help pull out damaged or stuck cars. Are established on SUVs or off-road equipment.
The main value by which winches are chosen is tractive effort. Pulling force is the value of the force with which the winch drive mechanism is able to pull. Its designation is usually indicated in pounds (lbs), where 1 pound is equal to 0.4535 kg.
It should also be borne in mind that the traction force can be doubled if a special power unit (polyspast) is used.
This model of the redBTR HUNTER winch has passed all the necessary tests for traction and reliability. Fully compatible with UAZ Hunter. Since 2019, it has been installed at the UAZ LLC plant and is included in the package of UAZ Hunter Expeditionary vehicles.
Endurance, power, speed, these are the qualities of a good hunter and winch of the HUNTER series from redBTR.
The design of the winch consists of a body, an engine, a gearbox, a drum. The package includes: control unit, remote control panel, wired control panel, metal cable, hawse and hook.
The HUNTER winch has a three-stage planetary gearbox. The gears of the reducer undergo a special nitrocarburizing of the surface layer with subsequent hardening, which makes it possible to achieve a tooth hardness of up to 35 (HRC) units on the Rockwell scale. This protects against deformation even under maximum loads.
This model of the winch is able to work with a short immersion under water to a depth of 1 meter. Water resistance is ensured by several factors: a rubber gasket guarantees a tight connection between the motor housing and the bracket, rubber cuffs protect the motor and gearbox from the side of the connection with the winch drum from moisture, a closed control unit and a cap for the wired remote control connector protect the contact group from corrosion.
The complete set of the winch for Hunter and SGR vehicles differs in cable length. The length of the power cable "+" (corrugated) is 2.8 meters, the power cable "-" is 1.5 meters.
Specifications Pulling force: 9500 pounds (4310 kg). Motor type: 6.0 HP / 4.4 kW, 12 V, with field winding. Reducer: 3-stage planetary. Gear ratio: 265:1. Inclusion / deenergizing of a reducer: Rotary handle. Rope: Steel, ø 9.5 mm × 28 meters. Drum: ø 64 × 224 mm. Load cycle: Periodic. Keys: Cast iron. Mounting dimensions: 254 × 114.3 mm. Remote control: Yes, range up to 50 meters. Dimensions: (L × W × H) 540 × 165 × 160 mm. Packing dimensions: (L × W × H) 580 × 350 × 210 mm. Weight: 36.5 kg.
Equipment Electric winch - 1 pc. Steel cable ø 9.5 mm x 28 meters - 1 pc. Cast iron hawse - 1 pc. Steel hook 3/8’ – 1 pc. Remote control - 1 pc. Remote control on the wire - 1 pc. Power cable - 1 set ("+" - 2.8 meters, "-" - 1.5 meters).