Car winches are installed on a car and serve to overcome impassable off-road tracks in viscous soil, bogs or difficult terrain. They also serve to help in pulling out stuck or damaged cars.
Electric winches have gained the greatest popularity among off-road enthusiasts. They are easily connected to the car battery. Their installation is mainly carried out on a power bumper or using special installation sites.
The main parameter by which winches are chosen is the pulling force, measured in English pounds lbs (1 pound is equal to 0.4535 kg). How to calculate the required pulling force of a winch for your car? When choosing this value, use the formula: Vehicle WEIGHT x 2 = Traction Force. In addition, it should be borne in mind that when using a power unit, the traction force of the winch increases by 2 times.
Applicability Are applied to any cars with the curb weight up to 2,5 tons.
Advantages redBTR electric winches are for cars that do not give up in the face of the difficulties of the road element, but overcome them.
Due to their relatively small size, high rope winding speed, and high traction force, redBTR winches have earned the trust of fans of extreme travel and trophy-raid participants.
Electric winches of the MISSION IMPOSSIBLE series operate on the vehicle's on-board network voltage of 12 Volts and are designed for installation on off-road vehicles weighing from 1.5 to 3 tons.
Winches of the MISSION IMPOSSIBLE series have improved waterproofing characteristics and a reinforced metal body, which allows you to be invulnerable in the face of off-road elements.
The increased section of the double spring increases the reliability of the winch brake.
Oversized gears evenly distribute the load on the teeth, extending the life of the gearbox. The planetary type gearbox itself has a three-stage transmission, which significantly affects the increase in the service life of the gearbox, and an increased gear ratio of 180: 1 shafts.
Remote control with cable and autonomous types of power supply. Recharging the batteries of the remote control occurs when connected to the winch control unit.
The aluminum heat-removing screen provides additional cooling of the engine - prolongs the time of the winch operation session.
Remote control wired/wireless
Winches of the TROPHY (MISSION IMPOSSIBLE) series are equipped with one control panel operating in two modes: wired and wireless.
The choice of the mode of the remote control wired / wireless is carried out by pressing a special button located on the remote control.
Specifications Pulling force: 10,000 pounds (4535 kg). Motor type: 6.0 HP / 4.5 kW, 12 V, with field winding. Reducer: 3-stage planetary. Gear ratio: 180:1. Inclusion/switching off of a reducer: Rotary handle. Cable: Synthetic, ø 9.5 mm × 28 meters. Drum: ø 64 × 254 mm. Dimensions: (L × W × H) 535 × 165 × 244 mm. Weight: 35 kg. Load cycle: Periodic. Key: Aluminum. Mounting dimensions: 254 × 114.3 mm. Remote control: Yes, range up to 50 meters.
Equipment Electric winch - 1 pc. Synthetic rope ø 9.5 mm x 28 meters - 1 pc. Aluminum fairlead - 1 pc. Steel hook 3/8’ – 1 pc. Control unit - 1 pc. Control panel (wired / remote control) - 1 pc. Power cable - 1 set.
Mounting elements: Bolt M10, nut M10, washer 10 for fastening rollers / hawse (2 pcs.) - 1 set. Bolt M10, nut M10, washer 10 for attaching the winch to the platform (4 pcs.) - 1 set. Template for marking mounting holes - 1 pc.