Car winches are designed for self-pulling cars when they get stuck in viscous soil, quagmire, or to overcome a difficult road section. Also, car winches are used to help pull out damaged or stuck cars. Are established on SUVs or off-road equipment.
The main value by which winches are chosen is tractive effort. Pulling force is the value of the force with which the winch drive mechanism is able to pull. Its designation is usually indicated in pounds (lbs), where 1 pound is equal to 0.4535 kg.
It should also be borne in mind that the traction force can be doubled if a special power unit (polyspast) is used.
They are used for any vehicles with a curb weight of up to 1.5 tons.
Winches of the HUNTER series have proven themselves on the untrodden trails favored by avid anglers and hunters. This series has gained the greatest popularity among off-road enthusiasts, due to its high quality and affordability in its segment.
The redBTR HUNTER winch models have passed all the necessary tests for traction and reliability. Fully compatible with UAZ vehicles. Since 2019, they have been installed at the UAZ LLC plant and are included in the package of UAZ Hunter Expedition and UAZ SGR Combi Expedition vehicles.
Winch gearbox of planetary type with three-stage transmission. The gear teeth of the reducer undergo a special process of nitrocarburizing the surface layer with their additional hardening. This makes it possible to achieve metal hardness up to 35 HRC (on the Rockwell scale), which protects against tooth deformation under maximum loads.
The HUNTER winch has a degree of protection against moisture and dust IP67, thanks to which it can work even with a short immersion under water to a depth of 1 meter. The rubber gasket in the connection of the motor housing with the bracket guarantees water tightness, and on the side of the connection with the winch drum there are rubber cuffs that protect the motor and gearbox from moisture. The connector of the contact group is protected from corrosion by a cap. The control unit is closed from moisture.
Specifications Pulling force: 6000 pounds (2720 kg). Motor type: 5.0 HP / 3.7 kW, 12 V, with field winding. Reducer: 3-stage planetary. Gear ratio: 172.8:1. Inclusion / deenergizing of a reducer: Rotary handle. Rope: Synthetic. Drum: ø 64 × 134 mm. Load cycle: Periodic. Key: aluminum key. Mounting dimensions: 164 × 114.3 mm. Remote control: Yes, range up to 50 meters. Dimensions: (L × W × H) 450 × 160 × 162 mm. Package dimensions: (L × W × H) 590 × 355 × 210 mm. Packed weight: 22.38 kg.
Equipment Electric winch - 1 pc. Synthetic rope 28 meters - 1 pc. Aluminum fairlead - 1 pc. Steel hook 3/8’ – 1 pc. Control unit - 1 pc. Remote control - 1 pc. Remote control on the wire - 1 pc. Power cable - 1 set ("+" - 2.8 meters, "-" - 1.5 meters). Mounting elements: Bolt M10, nut M10, washer 10 for fastening the hawse (2 pcs.) - 1 set. Bolt M10, nut M10, washer 10 for attaching the winch to the platform (4 pcs.) - 1 set. Template for marking mounting holes.