Wheel spacers or track wideners are used to increase the spacing between the wheelbase. This allows:
widening the track of the car, which is a significant factor in off-road operation;
increase the stability and controllability of the car when passing difficult and rough sections of the road;
visual wheel offset makes the vehicle attractive;
the ability to install on the car rims that are not adapted to a specific car model (having a different offset - ET).
Applicable to Land Rover vehicles (Defender 90-06, Séries 127 85-89, New Defender from 07, Range Rover Classic up to 95, Discovery 1 89-98). div>
The design feature of this redBTR adapter is 5 or 6 pressed-in wheel studs with a strength class of 10.9. During installation, this type of adapter is attached to the vehicle hub using standard studs and special nuts that are supplied with the adapters, and then the rim is attached to the adapter using standard wheel nuts. This type of adapter significantly widens the track of the car, which allows you to increase the off-road capabilities of the car, install wide wheels, and radically change the exterior of the car.
Wheel spacers redBTR allow you to increase the spacing of the wheelbase by 60 mm (2.36").
PCD bolt pattern - 5x165.1 mm. Landing diameter SV - 113 mm. Thickness - 30 mm (1.18"). Material - aluminum. Packing size - 180x180x100 mm.
Wheel spacer (track expander) - 2 pcs. Pressed-in studs (strength class 10.9) - 5 pcs. Nuts for fastening to the wheel hub - 5 pcs. Passport-instruction - 1 piece