Destination
Wheel washers are used to increase wheelbase spacing.
This allows:
- widening the track of the car, which is a significant factor in off-road operation;
- increase the stability and controllability of the car when passing difficult and rough sections of the road;
- the ability to install on the car rims that are not adapted to a specific car model (having a different offset - ET).
Applicability
Used for UAZ vehicles of all modifications, Lada 4x4 (NIVA), Nissan (Terrano II 93-06, Navara D22 from 02, Patrol G60/Safari 60-80, Patrol MK, MQ, K160, K260, W160, W260 86-94, Patrol GRY 60 /Safari from 02/99).
Description
redBTR wheel washers have large-diameter through holes, the size and configuration of which allow the installation of rims with a mounting hole diameter (PCD formula) of 5 × 139.7 or 6 × 139.7 and center hole (CB) 108.0 mm.
This type of adapter is ideal for situations where you only need to slightly widen the track to accommodate higher negative offset rims on your vehicle. Mounting the spacer washer is extremely easy and does not require changing the wheel studs, in addition, this type of adapter allows you to avoid undermining the calipers of some cars when installing discs with a non-standard X-factor on them.
Wheel washers redBTR allow you to increase the spacing of the wheelbase by 12 mm (0.48").
Characteristics
PCD bolt pattern - 5x139.7 mm.
Landing diameter NE - 108 mm.
Thickness - 6 mm (0.24").
Material - aluminum.
Packages
Wheel washer (track expander) - 4 pcs.
Passport-instruction - 1 piece
